How to Replace a UPVC Door Replacement Lock
If your door lock jams or doesn't work in the way it should, you might be looking to replace it. It might seem difficult however the procedure is straightforward and doesn't require a locksmith professional.
A few basic tools, some patience and lots of care should be enough. Here's what you must do:
Take a measurement of the door
If you're having difficulty locking your uPVC door or it's not closing or lock properly, it may be time to get a new lock. If you've recently moved or a tenant has moved out without returning the keys or your multipoint gear box is showing signs of wear and tear, it's simple to swap out the barrel of your lock for a new one that provides an extra layer of security.
It is necessary to take measurements prior to purchasing an entirely new lock. This will ensure that the new lock will be a good fit and won't affect the security of your home. The backset is the most important. This is the distance that runs from the middle of the keyhole bore hole to the edge of the door. It's typically 2 3/8 or 2 3/4 inches. Use a measuring tape or ruler to measure this measurement and write the results on paper or a notepad.
You'll also need to know the faceplate's width. This is the amount of thickness the part covers the mechanism of the lock. If you are able to, purchase a replacement lock from the same manufacturer, because they'll be constructed to the same dimensions. If you cannot find the manufacturers name or mark, simply determine the width of your existing cylinder. You can also determine the width of the cylinder by placing a pencil over the keyhole.
Once you have the measurements, you can start removing the old cylinder. Start by loosening the screw that holds the handle together using the Phillips-head screwdriver. Then, loosen the screws that hold the handles on the exterior and interior together. After these screws have been removed, you are able to remove the barrel screw located on the handle's exterior and take the cylinder off.
If the cylinder gets stuck in the lock, you can use WD-40, or another lubricant. It is essential not to try to force it out. Forceful turns can damage the internal gearbox of your lock. Consider upgrading to a lock with anti-snap, antibump and anti-snap security. This will help to make it more resistant to attacks by thieves.
Source the Lock
Whether you're replacing an old lock following a burglary or upgrading for better security There are some things to consider when sourcing your new door lock. Make sure door locks replacement got the right size of cylinder that will fit your door and that you're buying from a trusted brand to ensure a good fit and high-quality. You'll also need a few basic tools for the job, including tape measure, a screwdriver and a rubber mallet.
There are several indicators that your upvc lock is about to wear out and will require replacement. Typical problems include visible damage to the lock or a handle that is loose and isn't fitting properly. If the lock is jamming or not locking at all it's time to replace it.
Installing the lock correctly is crucial once you've picked the correct one. This will ensure that it locks and works properly. Always follow the manufacturer's instructions to install the new multipoint lock mechanism to the upvc door panel and to attach the correct handles and faceplates. Test the mechanism by locking the door and unlocking it from both the inside and outside. When you've finished the job, it's time for celebration.
It can be difficult to change the lock on a upvc, but you can do it on your own without the assistance of locksmith. It's easy to replace your lock if one is aware of the indicators and have the appropriate tools.
Be aware that a lock made of upvc can benefit from lubrication, as with any other moving component. A few sprays of silicone or a graphite powder lubricant could help to prolong their lifespan by ensuring they are free of excessive friction that can cause premature wear and tear. Regular cleaning using a damp cloth and WD-40 can also go a long way towards keeping your door locks in good condition.
Remove the Cylinder
It is possible to change the lock barrel if you are having problems with your door made of upvc. This is an easy DIY project and can be done in just several minutes. It's an effective way to maintain home security. The most important part of this process is identifying the manufacturer of the lock you have in place to be able to locate a suitable replacement.
A faulty door lock can be a real pain, not to mention an extremely security risk. It's not uncommon for the locks on uPVC doors to experience issues and it's essential to keep up with regular maintenance. In fact, experts recommend that you change your lock every seven years. If your lock is badly damaged or you aren't satisfied with its performance, expert assistance could be worth a look.
For uPVC it is a pin system, referred to as the euro cylinder is used in most cases. They are simple to use and seldom break down, but can still be vulnerable. In the end it's a good idea to replace the lock's cylinder by one that is more modern and has anti-snap and anti-bump protection to stop burglaries.
The first step to change your uPVC lock is removing the handle and expose the old cylinder. This can be a little difficult as there are typically some screws hidden underneath the handles, so be sure you have a screwdriver handy. You'll need to gently pull and move the cylindrical until it is loose. Once it loosens then you can pull it out of the socket.
If you find the right replacement then simply screw it into place and reverse the removal process. It is important not to overtighten the lock, as this can cause the cylinder in the door to become stuck and stop working as it should. Test the uPVC replacement lock by opening and closing it from the inside and outside. It should now be in a position to lock and unlock it using your key! If not, ensure the screws are tightened and try again.
Install the Lock
You'll need to conduct a bit of research first to make sure that the lock you select is suitable for your door. You will be required to know your backset and faceplate dimensions - the distance between the edge of the front door and the centre of the handle/cylinder with the type of lock you want to ensure that the new lock is fitted correctly and does not compromise security.
After you've done this, it's time to install the new lock. It is recommended to prop the door open or secure it so that it doesn't close during the process. To begin, use a Phillips head driver to loosen the screws that hold the handle in place. After they've been removed, you should be able to slide the handle's outer and inner parts apart.
You can now begin to take off the old cylinder, which you'll need to do by removing it from its barrel. Once you've removed your cylinder, you'll be able to install the new lock, ensuring you follow the instructions for your specific model. Once it's installed you can test the new lock by removing and closing the door from both the outside and inside, locking and unlocking it from the inside and then retesting it.
There are many reasons you may need to change the locks on your uPVC door. It might be that you recently moved in and you don't have a lock key, or that the previous tenant didn't return the key, or you might just need to upgrade to the most secure lock. It isn't going to take more than five minutes to replace the lock cylinder.
Whether your uPVC doors are multipoint or single-point locks, they all use the same mechanism. This means that they could be susceptible to issues occasionally like not being able to close or getting stuck. These issues can be caused by weather conditions or wear and tear or just everyday use. The majority of these issues can be easily corrected with a little maintenance or hiring a locksmith.